Style 1050 Boiler Tube Thermocouples On Thermocouple Technology, LLC

Skip to Content

Accurate Measurements of Boiler Tube Surface Temperatures.
Designed to perform in the Boiler Environment
Fast speed of response: Measuring junction underneath pad.
Uniform Sheath Diameter over entire length.
Rugged MgO insulated sheath.
Fully annealed for ease of bending.
Factory Pre-Formed pads.
High Temperature moisture seal.
Flexible Leads with strain relief.
Tag # stamped on pad & SS tag.

Modify Configuration

Reset Cancel View Results

Item #

1050-J-1-1

Style	Style 1050 Boiler Tube Thermocouple with TTEC’s “V shaped” fast response Weld Pads, SS sheath, same size transition, and flexible leads.
Welding Pads	TTEC's "V shaped" House Pads, stainless steel, factory formed to fit 2"- 4" O.D. Boiler Tubes. Two pads standard.
Calibration
Sheath Material
Sheath Diameter	0.187"
Sheath Insulation	Compacted Magnesium Oxide.
Sheath Length [ft]	Available Range: 1 to 250
Measuring Junction	Grounded, Located underneath “V” pad for fast speed of response.
Lead Wire	#20 AWG, Solid, Fiberglass over each & overall
Lead Length [ft]	Available Range: 1 to 100
Transition	Same size as sheath (.187" O.D.), Stainless steel with high temperature moisture seal (500ºF) and strain relief for lead wire.
Fittings	Compression Type, Stainless Steel, 1/4" NPT, two standard.
Tag	Permanent, SS, 1 standard
Sheath Options
Lead Wire Option
Junction Options

Reset Cancel View Results