| Items |
TT7000-6R0
Model TT7000 Dual-Line Temperature Meters
|
TT7000-6R2
Model TT7000 Dual-Line Temperature Meters
|
TT7000-6R3
Model TT7000 Dual-Line Temperature Meters
|
TT7000-6R4
Model TT7000 Dual-Line Temperature Meters
|
TT7000-6R5
Model TT7000 Dual-Line Temperature Meters
|
|
Options Installed
|
N/A
None
|
N/A
2 Relays
|
N/A
4-20 mA Output
|
N/A
4 Relays
|
N/A
2 Relays & 4-20 mA Output
|
|
Power Options
|
N/A
85-265 VAC 50/60 Hz, 90-265 VDC 20 W max
|
|
Display
|
N/A
0.60 in (15 mm) high red LEDs, 6 digits
|
|
Inputs
|
N/A
Thermocouples J, K, T, E, R, S, B, N, C and RTD 100 Ohm Platinum
(0.00385 & 0.00392 curves), 10 Ohm Copper, 120 Ohm Nickel, 1000 Ohm Platinum
|
|
Resolution
|
N/A
1º (up to 4 Digits) or 0.1º (up to 5 Digits)
|
|
Temperature Limit
|
N/A
-20 to 65 ºC
|
|
Width
|
N/A
4.680 in119.00 mm
|
|
Height
|
N/A
2.450 in62.00 mm
|
|
Depth
|
N/A
5.640 in143.00 mm
|
|
General Specifications
|
N/A
Except where noted all specifications apply to operation at +25 ºC.- Display: Main display: 0.60" (15 mm) high red LEDs; second display: 0.46" (12 mm) high red LEDs. Both displays have six-characters with leading zero blanking. Temperature value is four or five-digit F/C, based on configuration.
- Display Intensity: Eight intensity levels
- Display Update Rate: 5/second (200 ms)
- Front Panel: NEMA 4X, IP65
- Programming Methods: Four front panel buttons, digital inputs, PC and MeterView Pro S/W, Modbus registers, or cloning using Copy function.
- Noise filter: Programmable from 2 to 199 (0 will disable filter)
- Filter Bypass: Programmable from 0.1 to 99.9% of span
- Recalibration: Calibrated at the factory. Recalibration is recommended at least every 12 months.
- Max/Min Display: Max / min temperature readings are stored until reset by the user or until power to the meter is turned off.
- Password: Three programmable passwords restrict modification of programmed settings. Pass 1: Allows use of the F1-F3 function keys. Pass 2: Allows use of the F1-F3 function keys and changing the set/reset points. Pass 3: Restricts all programming and F1-F3 keys.
- Non-Volatile Memory: All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
- Fuse: Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
- Normal Mode Rejection: Greater than 65 dB at 50/60 Hz
- Isolation: 4 kV input/output-to-power line. 500 V input-to-output
- Environmental: Operating temperature range: -20 to 65 ºC. Storage temperature range: -40 to 85 ºC. Relative humidity: 0 to 90% non-condensing.
- Connections: Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
- Enclosure: 1/8 DIN, high impact plastic, UL 94V-0, color: black
- Mounting: 1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm). Two panel mounting bracket assemblies are provided.
- Tightening Torque: Screw terminal connectors: 5 lb-in (0.56 Nm)
- Weight: 9.5 oz (269 g)
- UL File Number: UL & c-UL Listed. E160849; 508 Industrial Control Equipment.
- Warranty: 3 years parts & labor
|
|
Temperature Inputs
|
N/A
- Input Impedance: Greater than 100 kOhm
- Offset Adjust: User programmable offset adjust ± 199.9 degrees
- Temperature Drift: ± 2 ºC maximum from 0 to 65 ºC ambient temperature; ± 4 ºC maximum from -20 to 0 ºC ambient temperature
- Sensor Break: Display flashes "Open", relays can be programmed to go "On", "Off", or to "Ignore" (detected as an upscale condition).
- Averaging: Up to 10 RTDs connected in parallel can be averaged.
|
