Model TT7000 Dual-Line Temperature MetersIndicators
Averages up to 10 RTD Sensors
Automatic Cold Junction Compensation
NEMA 4X, IP65 Front
Universal 85-265 VAC or 12/24 VDC Input Power
Large Dual-Line 6-Character Display, 0.60" & 0.46"
Programmable Displays & Function Keys
Sunlight Readable Display
2 or 4 Relays + Isolated 4-20 mA Output Options
External 4-Relay & Digital I/O Expansion Modules
RS-232, RS-422/485 Serial Communication Options
Modbus® RTU Protocol Standard
Notes: 1. Panel cutout required: 1.772 in x 3.622 in (45mm x 92mm) 2. Panel thickness: 0.040 - 0.250 in (1.0mm - 6.4mm) 3. Mounting brackets lock in place for easy mounting 4. Clearance: Allow 6 in (152 mm) behind the panel
TT7000-6R0 Model TT7000 Dual-Line Temperature Meters
TT7000-6R2 Model TT7000 Dual-Line Temperature Meters
TT7000-6R3 Model TT7000 Dual-Line Temperature Meters
TT7000-6R4 Model TT7000 Dual-Line Temperature Meters
TT7000-6R5 Model TT7000 Dual-Line Temperature Meters
Options Installed
N/ANone
N/A2 Relays
N/A4-20 mA Output
N/A4 Relays
N/A2 Relays & 4-20 mA Output
Power Options
N/A85-265 VAC 50/60 Hz, 90-265 VDC 20 W max
Display
N/A0.60 in (15 mm) high red LEDs, 6 digits
Inputs
N/AThermocouples J, K, T, E, R, S, B, N, C and RTD 100 Ohm Platinum
(0.00385 & 0.00392 curves), 10 Ohm Copper, 120 Ohm Nickel, 1000 Ohm Platinum
Resolution
N/A1º (up to 4 Digits) or 0.1º (up to 5 Digits)
Temperature Limit
N/A-20 to 65 ºC
Width
N/A4.680 in119.00 mm
Height
N/A2.450 in62.00 mm
Depth
N/A5.640 in143.00 mm
General Specifications
N/AExcept where noted all specifications apply to operation at +25 ºC.
Display: Main display: 0.60" (15 mm) high red LEDs; second display: 0.46" (12 mm) high red LEDs. Both displays have six-characters with leading zero blanking. Temperature value is four or five-digit F/C, based on configuration.
Display Intensity: Eight intensity levels
Display Update Rate: 5/second (200 ms)
Front Panel: NEMA 4X, IP65
Programming Methods: Four front panel buttons, digital inputs, PC and MeterView Pro S/W, Modbus registers, or cloning using Copy function.
Noise filter: Programmable from 2 to 199 (0 will disable filter)
Filter Bypass: Programmable from 0.1 to 99.9% of span
Recalibration: Calibrated at the factory. Recalibration is recommended at least every 12 months.
Max/Min Display: Max / min temperature readings are stored until reset by the user or until power to the meter is turned off.
Password: Three programmable passwords restrict modification of programmed settings. Pass 1: Allows use of the F1-F3 function keys. Pass 2: Allows use of the F1-F3 function keys and changing the set/reset points. Pass 3: Restricts all programming and F1-F3 keys.
Non-Volatile Memory: All programmed settings are stored in nonvolatile memory for a minimum of ten years if power is lost.
Fuse: Required external fuse: UL Recognized, 5 A max, slow blow; up to 6 meters may share one 5 A fuse.
Normal Mode Rejection: Greater than 65 dB at 50/60 Hz
Isolation: 4 kV input/output-to-power line. 500 V input-to-output
Environmental: Operating temperature range: -20 to 65 ºC. Storage temperature range: -40 to 85 ºC. Relative humidity: 0 to 90% non-condensing.
Connections: Removable screw terminal blocks accept 12 to 22 AWG wire, RJ45 for external relays, digital I/O, and serial communication adapters.
Enclosure: 1/8 DIN, high impact plastic, UL 94V-0, color: black
Mounting: 1/8 DIN panel cutout required: 3.622" x 1.772" (92 mm x 45 mm). Two panel mounting bracket assemblies are provided.
